How to Read My Rear End Tag in My 1996 Ford F350
How to Read a Ford Truck Axle Tag
past Cassandra Tribe

under truck image by Patricia Mesanko from Fotolia.com
Ford truck axles are identified by a pocket-size tag attached to the differential casing on the rear axle in near cases. The only axles that are marked differently are ones made by Dana. The aforementioned markings are used but they are placed on the casing and the long shaft of the axle rather then the tag. The tag will tell the date the axle was fabricated, the mill, the ratio, pinion gear and model all information that is needed when rebuilding or repairing the beam.
Step 1
Clamber under the truck so the embrace to the differential housing can be seen. The differential housing is the bell style housing located near the heart of the rear axle. The cover will be on the side of the housing toward the front of the vehicle that the bolts are on.
Step ii
Wipe the encompass clean. Spray brake cleaner on the housing cover if it is greasy and so wipe it make clean. Use a flashlight to locate the beam tag that is mounted on the cover or, to see if the tag information is stamped directly onto the cover, indicating it is a Dana axle.
Step 3
Write down the v sets of data contained on the tag -- or iii sets stamped on the Dana encompass, the remaining ii sets will be stamped on the long shaft of the axle. Each prepare volition incorporate numbers, letters or an alphanumeric combination that is a unique identifier for the axle.
Step four
Interpret the date of the axle by finding the alpha numeric code that begins with a number, followed by a letter, followed by two numbers. The first number is the last digit of the year it was made, the letter indicates the calendar month (A through L for January through December) and the final two digits are the day of the month in a 'DD' format. On a Dana axle, the date volition exist the number stamped on the long shaft nearest the differential housing.
Pace five
Locate the part of the tag that consists of a series of 3 messages, a hyphen and so one or two more letters and a possible single digit after that. This is the code for the axle model, the number at the end -- if nowadays -- will indicate if there is a potential interchange possible with another model. Use this code to reference what parts will piece of work with a rebuild or repair of the axle.
Footstep 6
Find the ii digit decimal number (for instance seven.five). This is the band gear diameter in millimeters.
Footstep seven
Find the gear ratio code. It will either be a 3-digit code with a space betwixt the start digit and the remaining ii or, it will be a digit so a letter 'L' followed by two more than digits. The 'L' indicates the gear ration is of a locked traction type.
The remaining alphanumeric lawmaking will be of varying length and indicates the plant in which the axle was made or, on the Dana axle -- the code is located on the shaft -- the lawmaking represents the "Neb of Material" number for the axle.
References
Tips
- Don't waste time trying to look up the model number. Take the number to a parts store and have them enter information technology in their database. There are hundreds of Ford axles and that will exist the quickest and surest way to decode the specific model.
Things You lot'll Demand
- Clean rag
- Restriction cleaner (if needed)
- Flashlight
- Axle tag
- Pen
- Paper
Warnings
Writer Bio
Cassandra Tribe has worked in the construction field for over 17 years and has experience in a multifariousness of mechanical, scientific, automotive and mathematical forms. She has been writing and editing for over ten years. Her areas of interest include culture and society, automotive, computers, business organisation, the Internet, scientific discipline and structural engineering and implementation.
More Articles
Source: https://itstillruns.com/read-ford-truck-axle-tag-7735023.html
0 Response to "How to Read My Rear End Tag in My 1996 Ford F350"
Post a Comment